0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Probes

Set Descending Direction

   

Items 1 to 50 of 87 total

  1. 1
  2. 2
  1. NM-RC-C

    Specially designed probes for high mechanical loads and scratch testing applications. Each probe comes with a calibrated spring constant and high resolution SEM showing the tip radius and cone angle.
    f = 750 kHz   |   k = 350 N/m   |   tip coating: diamond tip

    Starting at: $1,500.00

    Ships in 4 Weeks

  2. NM-TC

    Specially designed probes for high mechanical loads and scratch testing applications. For a similar probe but with a higher resolution tip, see NM-RC
    f = 750 kHz   |   k = 350 N/m   |   tip coating: diamond tip

    Starting at: $750.00

    Ships in 4 Weeks

  3. PPP-QLC-MFMR

    Silicon probe coated with low coercivity material for MFM in vacuum.
    f = 75 kHz   |   k = 2.8 N/m   |   tip coating: soft magnetic

    Starting at: $1,185.00

  4. PPP-XYNCHR

    Silicon probe with XY-auto-alignment probes for non-contact /tapping mode application.
    f = 330 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $320.00

  5. TL-NCL

    Tipless long cantilever.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: none

    Starting at: $320.00

  6. PPP-QNCHR

    Silicon probe with high Q and Al reflective coating for tapping/non contact mode in vacuum.
    f = 330 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $640.00

  7. TL-NCH

    Tipless cantilever.
    f = 330 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $320.00

  8. SSS-QMFMR

    Silicon probe coated with thin magnetic material for high resolution MFM in vacuum.
    f = 75 kHz   |   k = 2.8 N/m   |   tip coating: hard magnetic

    Starting at: $1,334.00

  9. ATEC-NCPt

    Conductive probe with visible tip apex for electrical measurements.
    f = 335 kHz   |   k = 45 N/m   |   tip coating: Pt/Ir

    Starting at: $890.00

  10. PL2-NCLR

    Silicon probe with plateau tip with Al reflex coating.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: none

    Starting at: $889.00

    Ships in 1-2 Weeks

  11. ASY.STM.PKG

    Platinum/Iridium (80/20) mechanically formed tip for STM application.
    Dia = 0.01"   |   lngth = 0.28"   |   tip material: Pt

    Starting at: $300.00

  12. PL2-NCHR

    Silicon probe with plateau tip with Al reflex coating.
    f = 330 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $889.00

  13. ATEC-NCAu

    Conductive silicon probe with Au tip coating and visible tip apex.
    f = 335 kHz   |   k = 45 N/m   |   tip coating: Au

    Starting at: $890.00

  14. HA100WS

    silicon nitride sharpened wedge tip for tapping mode in liquid.
    f = 160 kHz   |   k = 15 N/m   |   tip coating: none

    Starting at: $1,750.00

    Ships in 1-2 Weeks

  15. PL2-NCL

    Silicon probe with plateau tip.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: none

    Starting at: $889.00

  16. PL2-NCH

    Silicon probe with plateau tip for non-contact/tapping mode.
    f = 330 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $889.00

  17. NW-SSS-NCL

    Silicon probe with sharp tip and long cantilever for high resolution imaging in tapping/non-contact mode.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: none

    Starting at: $699.00

  18. NCL

    Silicon probe with long cantilever and no reflex coating for tapping/non-contact mode.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: none

    Starting at: $279.00

  19. PPP-NCSTPt

    Conductive probe for electrical measurements in soft tapping mode.
    f = 160 kHz   |   k = 7.4 N/m   |   tip coating: Pt/Ir

    Starting at: $449.00

  20. DT-NCLR

    Silicon probe with diamond coated tip and long cantilever for tip degrading samples.
    f = 210 kHz   |   k = 72 N/m   |   tip coating: diamond

    Starting at: $1,185.00

  21. NW-DT-NCHR

    Silicon probe with diamond coated tip for tapping/non-contact mode on tip degrading samples.
    f = 400 kHz   |   k = 80 N/m   |   tip coating: diamond

    Starting at: $1,119.00

  22. SSS-NCLR

    Silicon probe with sharp tip and long cantilever for high resolution imaging in tapping/non-contact mode.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: none

    Starting at: $757.00

  23. PPP-NCHPt

    Conductive probe for electrical measurements.
    f = 330 kHz   |   k = 42 N/m   |   tip coating: Pt/Ir

    Starting at: $449.00

  24. NW-S-MFMR

    Silicon probe coated with low moment material for MFM.
    f = 75 kHz   |   k = 2.8 N/m   |   tip coating: soft magnetic

    Starting at: $615.00

  25. CDT-NCLR

    Silicon probe with conductive diamond coated tip and long cantilever for electrical measurements.
    f = 210 kHz   |   k = 72 N/m   |   tip coating: conductive diamond

    Starting at: $1,481.00

  26. NCLR

    Silicon probe with long cantilever and Al reflex coating for tapping/non-contact mode.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: none

    Starting at: $307.00

  27. ATEC-FMAu

    Conductive probe with tip visible at end of lever.
    f = 85 kHz   |   k = 2.8 N/m   |   tip coating: Au

    Starting at: $890.00

  28. NW-DT-NCLR

    Silicon probe with diamond coated tip and long cantilever for tip degrading samples.
    f = 210 kHz   |   k = 72 N/m   |   tip coating: diamond

    Starting at: $1,119.00

  29. PPP-NCLPt

    Conductive probe with long cantilever for electrical measurements.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: Pt/Ir

    Starting at: $449.00

  30. DT-NCHR

    Silicon probe with diamond coated tip for tapping/non-contact mode on tip degrading samples.
    f = 400 kHz   |   k = 80 N/m   |   tip coating: diamond

    Starting at: $1,185.00

  31. NW-AR5-NCLR

    Silicon probe with high aspect ratio tip (>5) for deep trench imaging.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: none

    Starting at: $839.00

  32. SSS-NCL

    Silicon probe with sharp tip and long cantilever for high resolution imaging in tapping/non-contact mode.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: none

    Starting at: $757.00

  33. NW-AR10-NCHR

    Silicon probe with high aspect ratio tip (>10) for deep trench imaging.
    f = 320 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $1,259.00

  34. PPP-NCLAu

    Conductive silicon probe with long cantilever for conductive measurements.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: Au

    Starting at: $384.00

  35. NW-AR5-NCHR

    Silicon probe with high aspect ratio tip (>5) for deep trench imaging.
    f = 320 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $839.00

  36. Arrow NC

    Silicon probe with tip at the end of cantilever and no reflex coating for tapping/non-contact mode.
    f = 285 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $270.00

  37. NW-CDT-NCLR

    Nanoworld silicon probe with long cantilever and conductive diamond coating for tapping/non-contact mode.
    f = 210 kHz   |   k = 72 N/m   |   tip coating: conductive diamond

    Starting at: $1,399.00

  38. NCLPt

    Silicon probe with long cantilever and PtIr coating for tapping/non-contact mode.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: PtIr

    Starting at: $419.00

  39. AR5-NCLR

    Silicon probe with high aspect ratio tip (>5) for deep trench imaging.
    f = 190 kHz   |   k = 48 N/m   |   tip coating: none

    Starting at: $889.00

  40. Arrow NCPt

    Silicon probe with PtIr coating for contact mode.
    f = 285 kHz   |   k = 42 N/m   |   tip coating: Pt/Ir

    Starting at: $407.00

  41. Arrow NCR

    Silicon probe with tip at the end of cantilever and Al reflex coating for tapping/non-contact mode.
    f = 285 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $297.00

  42. PtSi-NCH

    Sharp conductive probe with PtSi coating for electrical measurements.
    f = 330 kHz   |   k = 42 N/m   |   tip coating: PtSi

    Starting at: $1,481.00

  43. NW-MFMR

    Silicon probe coated with high moment material for MFM.
    f = 75 kHz   |   k = 2.8 N/m   |   tip coating: hard magnetic

    Starting at: $615.00

  44. CDT-NCHR

    Silicon probe with conductive diamond coated tip for electrical measurements.
    f = 400 kHz   |   k = 80 N/m   |   tip coating: conductive diamond

    Starting at: $1,481.00

  45. AR5T-NCH

    Silicon probe with high aspect ratio tip (>5) for deep trench imaging.
    f = 330 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $1,334.00

  46. SSS-NCH

    Silicon probe with sharp tip for high resolution imaging in tapping/non-contact mode.
    f = 330 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $757.00

  47. PPP-LM-MFMR

    Silicon probe coated with low moment material for MFM on magnetic samples.
    f = 75 kHz   |   k = 2.8 N/m   |   tip coating: hard magnetic

    Starting at: $691.00

  48. NW-AR5T-NCHR

    Silicon probe with high aspect ratio tip (>5) for deep trench imaging.
    f = 330 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $1,259.00

  49. PPP-NCSTAuD

    Silicon probe with Au reflective coating for soft tapping mode.
    f = 160 kHz   |   k = 7.4 N/m   |   tip coating: none

    Starting at: $320.00

  50. AR5-NCHR

    Silicon probe with high aspect ratio tip (>5) for deep trench imaging.
    f = 330 kHz   |   k = 42 N/m   |   tip coating: none

    Starting at: $889.00

Set Descending Direction

   

Items 1 to 50 of 87 total

  1. 1
  2. 2