Product was successfully added to your shopping cart.
Go to cart page
Continue
Probes
BioLever Mini; small nitride cantilever with silicon tip for tapping mode in liquid.
f = 110 kHz | k = 0.09 N/m | tip coating: none
Also known as OTESPA; silicon probe with visible apex tip for tapping mode.
f = 300 kHz | k = 26 N/m | tip coating: none
BioLever fast (also known as BL-AC10DS); ultra small cantilever for tapping mode in liquid.
Only on AFMs with
small laser spot such as Cypher.
f = 1500 kHz | k = 0.1 N/m | tip coating: none
Asylum electrolever with visible tip apex and conductive coating for nano-electrical measurements
f = 75 kHz | k = 2.8 N/m | tip coating: Ti/Ir
Silicon probe with visible apex tip for force modulation or soft tapping on medium to hard samples.
f = 150 kHz | k =9 N/m | tip coating: none
Also known as OLTESPA; medium soft cantilever for topgraphy and viscoelasticity of soft samples.
f = 70 kHz | k = 2 N/m | tip coating: none
Silicon probe with visible tip apex and magnetic coating for low coercivity MFM applications.
f = 75 kHz | k = 2.8 N/m | tip coating: permalloy
OLTESPA with Au reflective coating; medium soft cantilever for topography and viscoelasticity of soft samples.
f = 70 kHz | k = 2 N/m | tip coating: none
Sharp conductive probe with PtSi coating for electrical measurements.
f = 75 kHz | k = 2.8 N/m | tip coating: PtSi
Asylum electrolever with visible tip apex and conductive coating for tapping/non-contact mode.
f = 300 kHz | k = 42 N/m | tip coating: Ti/Ir
Silicon probe with visible tip apex and magnetic coating for standard MFM applications.
f = 75 kHz | k = 2.8 N/m | tip coating: CoCr
Silicon probe with visible tip apex and magnetic coating for low moment MFM applications.
f = 75 kHz | k = 2.8 N/m | tip coating: CoCr
OTESPA with Au reflective coating; silicon probe with visible apex tip for tapping mode.
f = 300 kHz | k = 26 N/m | tip coating: none
Silicon probe with visible tip apex and magnetic coating for high coercivity MFM applications.
f = 75 kHz | k = 2.8 N/m | tip coating: CoPt/FePt
BioLever fast with CNF tips (also known as BL-AC10FS); Carbon Nano Fiber probe for high resolution imaging.
Only on AFMs with
small laser spot such as Cypher.
f = 1500 kHz | k = 0.1 N/m | tip coating: none
Silicon probe with visible tip apex and magnetic coating for high moment MFM applications.
f = 75 kHz | k = 2.8 N/m | tip coating: CoCr
Silicon probe with visible tip apex and Au reflex coating for high speed imaging.
f = 2000 kHz | tip coating: none
Also known as OSCM; conductive probe with visible apex tip for electrical measurement.
f = 70 kHz | k = 2 N/m | tip coating: Ti/Pt
Fast silicon probe with visible apex tip for fast imaging.
Only on AFMs with
small laser spot such as Cypher.
f = 1600 kHz | k = 85 N/m | tip coating: none
Asylum electrolever with visible tip apex and conductive coating for tapping/non-contact mode.
f = 285 kHz | k = 42 N/m | tip coating: Ti/Ir
Silicon probe with Al reflective coating for soft tapping mode.
f = 160 kHz | k = 7.4 N/m | tip coating: none
Silicon probe with PtIr coating for tapping/non-contact mode.
f = 320 kHz | k = 42 N/m | tip coating: Pt/Ir
Silicon probe with Al reflex coating for force modulation mode.
f = 75 kHz | k = 2.8 N/m | tip coating: none
Silicon probe coated with high moment material for MFM.
f = 75 kHz | k = 2.8 N/m | tip coating: hard magnetic
Five each of Asylum MFM levers (ASYMFM; ASYMFMHC-R2; ASYMFMHM; ASYMFMLC; ASYMFMLM); Veeco equiv - MESPSP
Conductive probe for electrical measurements in force modulation mode.
f = 75 kHz | k = 2.8 N/m | tip coating: Pt/Ir
Nitride probe with shielded co-axial sensor specialized for sMIM applications.
f = 75 kHz | k = 8 N/m | tip coating: TiW/Au
Silicon probe with Al reflex coating for soft tapping mode.
f = 160 kHz | k = 7.4 N/m | tip coating: none
Silicon probe with PtIr coating for force modulation.
f = 75 kHz | k = 2.8 N/m | tip coating: Pt/Ir
Silicon probe with sharp tip for high resolution imaging in force modulation mode.
f = 75 kHz | k = 2.8 N/m | tip coating: none
Silicon probe with Au reflex coating for tapping/non contact mode.
f = 330 kHz | k = 42 N/m | tip coating: none
Nitride probe with shielded co-axial sensor specialized for sMIM applications.
f = 19 kHz | k = 1 N/m | tip coating: TiW/Au
Conductive probe with visible tip apex for electrical measurements in modulation mode.
f = 85 kHz | k = 2.8 N/m | tip coating: Pt/Ir
Silicon probe coated with thin magnetic material for high resolution MFM.
f = 75 kHz | k = 2.8 N/m | tip coating: hard magnetic
Quartz-like material probe with carbon EBD tip for high speed imaging in tapping/non-contact mode.
To be used only on AFMs with
small laser spot
f = 2000 kHz | k = 3 N/m | tip coating: none
Nitride probe with two triangular cantilevers for iDrive mode.
f = 10 & 32 kHz | k =0.02 & 0.09 N/m | tip coating: Cr/Au
CoNi side-coated tip silicon probe for high hi-resolution MFM.
f = 75 kHz | k = 2.8 N/m | tip coating: CoNi
Silicon probe with sharp tip for high resolution imaging in tapping/non-contact mode.
f = 330 kHz | k = 42 N/m | tip coating: none
Silicon probe with Al reflex coating for tapping/non-contact mode.
f = 320 kHz | k = 42 N/m | tip coating: none
Silicon probe with Al reflex coating for contact mode.
f = 13 kHz | k = 0.2 N/m | tip coating: none
Silicon probe with conductive diamond coated tip for electrical measurements.
f = 400 kHz | k = 80 N/m | tip coating: conductive diamond
Silicon probe coated with low coercivity material for MFM on soft magnetic samples.
f = 75 kHz | k = 2.8 N/m | tip coating: soft magnetic
Quartz-like material probe with carbon EBD tip for high speed imaging in tapping/non-contact mode.
To be used only on AFMs with
small laser spot
f = 300 kHz | k = 0.3 N/m | tip coating: none
Conductive silicon probe with Au tip coating for electrical measurements in non-contact/tapping mode.
f = 330 kHz | k = 42 N/m | tip coating: Au
Silicon probe with short cantilever and Au reflective coating for contact mode.
f = 23 kHz | k = 0.2 N/m | tip coating: none
Silicon probe with high aspect ratio tip (>5) for deep trench imaging.
f = 330 kHz | k = 42 N/m | tip coating: none
Quartz-like material probe with carbon EBD tip for high speed imaging in tapping/non-contact mode.
To be used only on AFMs with
small laser spot
f = 5000 kHz | k = 30 N/m | tip coating: none
Silicon probe with Au reflective coating for soft tapping mode.
f = 160 kHz | k = 7.4 N/m | tip coating: none
Silicon probe with long cantilevr and Au reflective coating for tapping/non contact mode.
f = 190 kHz | k = 48 N/m | tip coating: none
Nanoworld silicon probe with conductive diamond coating for tapping/non-contact mode.
f = 400 kHz | k = 80 N/m | tip coating: conductive diamond
Please wait...
We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies from this website.