Americas
North America
South America
Canada
Australia
The Asylum Research Store and Support will be closed for the holidays 12/20/2019 - 1/2/2020
Probes
SSS-QMFMR
Silicon probe coated with thin magnetic material for high resolution MFM in vacuum.
f = 75 kHz | k = 2.8 N/m | tip coating: hard magneticStarting at: $1,334.00
PPP-QLC-MFMR
Silicon probe coated with low coercivity material for MFM in vacuum.
f = 75 kHz | k = 2.8 N/m | tip coating: soft magneticStarting at: $1,185.00
Arrow EFM
Silicon probe with tip at the end of cantilever and PtIr coating for force modulation mode.
f = 75 kHz | k = 2.8 N/m | tip coating: Pt/IrStarting at: $370.00
PPP-CONTPt
Conductive probe for electrical measurements in contact mode.
f = 13 kHz | k = 0.2 N/m | tip coating: Pt/IrStarting at: $449.00
PPP-CONTSCAu
Conductive silicon probe with short cantilever with Au tip coating for contact mode electrical measurements.
f = 23 kHz | k = 0.2 N/m | tip coating: AuStarting at: $384.00
ATEC-FMAu
Conductive probe with tip visible at end of lever.
f = 85 kHz | k = 2.8 N/m | tip coating: AuStarting at: $890.00
CONTPt
Test Conductive probe with visible tip apex for electrical measurements in contact mode.
f = 13 kHz | k = 0.2 N/m | tip coating: Pt/Ir
ATEC-CONTPt
Conductive probe with visible tip apex for electrical measurements in contact mode.
f = 15 kHz | k = 0.2 N/m | tip coating: Pt/IrStarting at: $890.00
PtSi-CONT
Silicon probe with PtSi coating for contact mode
f = 13 kHz | k = 0.2 N/m | tip coating: PtSiStarting at: $1,481.00
PPP-CONTAu
Conductive silicon probe with Au tip coating for contact mode electrical measurements.
f = 15 kHz | k = 0.2 N/m | tip coating: AuStarting at: $384.00
NW-S-MFMR
Silicon probe coated with low moment material for MFM.
f = 75 kHz | k = 2.8 N/m | tip coating: soft magneticStarting at: $615.00
PPP-CONTSCPt
Conductive probe with short cantilever for electrical measurements in contact mode.
f = 23 kHz | k = 0.2 N/m | tip coating: Pt/IrStarting at: $449.00
Arrow CONTPt
Silicon probe with tip at the end of cantilever and PtIr coating for contact mode.
f = 14 kHz | k =0.2 N/m | tip coating: PtIrStarting at: $370.00
PPP-LFMR
Silicon probe for lateral force microscopy.
f = 23 kHz | k = 0.2 N/m | tip coating: noneStarting at: $320.00
PNP-DB
Pyrex probe with two diving board nitride cantilevers and tip for life science applications.
f = 17 & 67 kHz | k = 0.06 & 0.48 N/m | tip coating: noneStarting at: $440.00
CDT-CONTR
Silicon probe with conductive diamond coated tip for electrical measurements.
f = 20 kHz | k = 0.5 N/m | tip coating: conductive diamondStarting at: $1,481.00
PNP-TR-Au
Pyrex probe with two triangular gold coated nitride cantilevers and tip for life science applications.
f = 17 & 67 kHz | k = 0.08 & 0.32 N/m | tip coating: AU(35)Starting at: $480.00
PNP-TR
Pyrex probe with two triangular nitride cantilevers and tip for life science applications.
f = 17 & 67 kHz | k = 0.08 & 0.32 N/m | tip coating: noneStarting at: $440.00
Arrow CONTR
Silicon probe with tip at the end of cantilever and AL reflex coating for contact mode.
f = 14 kHz | k =0.2 N/m | tip coating: noneStarting at: $270.00
BL-TR800PB
Nitride probe with two triangular cantilevers for iDrive imaging.
f = 22 & 68 kHz | k =0.16 & 0.61 N/m | tip coating: Cr/Au
PPP-FMAu
Conductive silicon probe with Au coating for electrical measurements.
f = 75 kHz | k = 2.8 N/m | tip coating: AuStarting at: $384.00
PNP-TRS
Pyrex probe with single nitride cantilever and tip for bio applications
f = 67 kHz | k =0.32 N/m | tip coating: none
SC-35-M
CoNi side-coated tip silicon probe for high hi-resolution MFM.
f = 75 kHz | k = 2.8 N/m | tip coating: CoNiStarting at: $860.00
PPP-FMAuD
Silicon probe with Au reflective coating for force modulation.
f = 75 kHz | k = 2.8 N/m | tip coating: noneStarting at: $320.00
BL-TR400PB
Nitride probe with two triangular cantilevers for iDrive mode.
f = 10 & 32 kHz | k =0.02 & 0.09 N/m | tip coating: Cr/AuStarting at: $450.00
PPP-LC-MFMR
Silicon probe coated with low coercivity material for MFM on soft magnetic samples.
f = 75 kHz | k = 2.8 N/m | tip coating: soft magneticStarting at: $691.00
NW-MFMR
Silicon probe coated with high moment material for MFM.
f = 75 kHz | k = 2.8 N/m | tip coating: hard magneticStarting at: $615.00
CONTSCR
Silicon probe with short cantilever for contact mode.
f = 23 kHz | k = 0.2 N/m | tip coating: noneStarting at: $307.00
SC-20-M
CoNi side-coated tip silicon probe for high hi-resolution MFM.
f = 75 kHz | k = 2.8 N/m | tip coating: CoNiStarting at: $1,025.00
PPP-LM-MFMR
Silicon probe coated with low moment material for MFM on magnetic samples.
f = 75 kHz | k = 2.8 N/m | tip coating: hard magneticStarting at: $691.00
PPP-CONTSCAuD
Silicon probe with short cantilever and Au reflective coating for contact mode.
f = 23 kHz | k = 0.2 N/m | tip coating: noneStarting at: $320.00
Arrow FMR
Silicon probe with tip at the end of cantilever and Al reflex coating for force modulation mode.
f = 75 kHz | k = 2.8 N/m | tip coating: noneStarting at: $270.00
SSS-MFMR
Silicon probe coated with thin magnetic material for high resolution MFM.
f = 75 kHz | k = 2.8 N/m | tip coating: hard magneticStarting at: $1,185.00
ATEC-EFM
Conductive probe with visible tip apex for electrical measurements in modulation mode.
f = 85 kHz | k = 2.8 N/m | tip coating: Pt/IrStarting at: $890.00
CONTR
Silicon probe with Al reflex coating for contact mode.
f = 13 kHz | k = 0.2 N/m | tip coating: noneStarting at: $307.00
PPP-CONTAuD
Silicon probe with Au reflective coating for contact mode.
f = 15 kHz | k = 0.2 N/m | tip coating: noneStarting at: $320.00
PPP-MFMR
Silicon probe coated with high moment material for MFM.
f = 75 kHz | k = 2.8 N/m | tip coating: hard magneticStarting at: $691.00
PPP-EFM
Conductive probe for electrical measurements in force modulation mode.
f = 75 kHz | k = 2.8 N/m | tip coating: Pt/IrStarting at: $449.00
ASYMFMSMPL
Five each of Asylum MFM levers (ASYMFM; ASYMFMHC-R2; ASYMFMHM; ASYMFMLC; ASYMFMLM); Veeco equiv - MESPSPStarting at: $1,700.00
FMR
Silicon probe with Al reflex coating for force modulation mode.
f = 75 kHz | k = 2.8 N/m | tip coating: noneStarting at: $307.00
SMIM150-G5
Nitride probe with shielded co-axial sensor specialized for sMIM applications.
f = 75 kHz | k = 8 N/m | tip coating: TiW/AuStarting at: $750.00
SSS-FMR
Silicon probe with sharp tip for high resolution imaging in force modulation mode.
f = 75 kHz | k = 2.8 N/m | tip coating: noneStarting at: $757.00
SMIM300-G5
Nitride probe with shielded co-axial sensor specialized for sMIM applications.
f = 19 kHz | k = 1 N/m | tip coating: TiW/AuStarting at: $750.00
EFM
Silicon probe with PtIr coating for force modulation.
f = 75 kHz | k = 2.8 N/m | tip coating: Pt/IrStarting at: $419.00
AC240TSA-R3
OLTESPA with Au reflective coating; medium soft cantilever for topography and viscoelasticity of soft samples.
f = 70 kHz | k = 2 N/m | tip coating: none
AC240TM-R3
Also known as OSCM; conductive probe with visible apex tip for electrical measurement.
f = 70 kHz | k = 2 N/m | tip coating: Ti/PtStarting at: $400.00
ASYMFM-R2
Silicon probe with visible tip apex and magnetic coating for standard MFM applications.
f = 75 kHz | k = 2.8 N/m | tip coating: CoCrStarting at: $325.00
ASYMFMLM-R2
Silicon probe with visible tip apex and magnetic coating for low moment MFM applications.
f = 75 kHz | k = 2.8 N/m | tip coating: CoCrStarting at: $375.00
ASYMFMHM-R2
Silicon probe with visible tip apex and magnetic coating for high moment MFM applications.
f = 75 kHz | k = 2.8 N/m | tip coating: CoCrStarting at: $375.00
PtSi-FM
Sharp conductive probe with PtSi coating for electrical measurements.
f = 75 kHz | k = 2.8 N/m | tip coating: PtSiStarting at: $1,481.00
© 2016 Oxford Instruments Asylum Research, Inc. All Rights Reserved.
