Americas
North America
South America
Canada
Australia
The Asylum Research Store and Support will be closed for the holidays 12/20/2019 - 1/2/2020
Details
New OLYMPUS OMCL-AC series cantilevers are designed for AC mode AFM in air.
OMCL-AC series cantilever has a tetrahedral tip on the exact end of the cantilever.
Outstanding features of new tetrahedral probe:
Suitable for use with a wide range of sample surfaces:
The mid-range mechanical properties [resonance frequency: 300 kHz, spring constant: 26 N/m] of OMCLAC160TS-R3 allow for precise and gentle sample imaging.
Doped silicon cantilever:
The cantilever is made from silicon with a low surface resistance of 0.1 - 0.4 Ω・cm, 1/20 resistance of our conventional cantilevers.
Acclaimed 'TipView' structure:
The probe can be easily positioned at the exact point of your interest. The tip is located at the exact end of the cantilever so the tip apex is not obscured during optical observation.
Ideally point terminated tip:
The tip is tetrahedral, ideally point terminated. The tip apex 1 micron or more is further sharpened.
New concept chip:
The ideally parallel side-walls of the chip make tweezing easy and eliminate problems with chipping and debris.
OMCL-AC series cantilever has a tetrahedral tip on the exact end of the cantilever.
Outstanding features of new tetrahedral probe:
Suitable for use with a wide range of sample surfaces:
The mid-range mechanical properties [resonance frequency: 300 kHz, spring constant: 26 N/m] of OMCLAC160TS-R3 allow for precise and gentle sample imaging.
Doped silicon cantilever:
The cantilever is made from silicon with a low surface resistance of 0.1 - 0.4 Ω・cm, 1/20 resistance of our conventional cantilevers.
Acclaimed 'TipView' structure:
The probe can be easily positioned at the exact point of your interest. The tip is located at the exact end of the cantilever so the tip apex is not obscured during optical observation.
Ideally point terminated tip:
The tip is tetrahedral, ideally point terminated. The tip apex 1 micron or more is further sharpened.
New concept chip:
The ideally parallel side-walls of the chip make tweezing easy and eliminate problems with chipping and debris.
| Cantilever Specifications | |
|---|---|
| Spring k (N/m | 26 (8.4 - 57) |
| Freq (kHz) | 300 (200 - 400) |
| Length (µm) | 160 (152 - 168) |
| Width (µm) | 40 (39 - 41) |
| Thickness (µm) | 3.7 (3.0 - 4.4) |
| Shape | Rectangular |
| Material | Silicon |
| Reflex Coating (nm) | Cr/Au |
| Tip Specifications | |
|---|---|
| Tip radius (nm) | 7 |
| Tip height (µm) | 14 |
| Front angle (°) | 0 +/- 1 |
| Back angle (°) | 35 +/- 1 |
| Side angle (°) | 15 +/- 1 |
| Tip shape | 3-sided |
| Tip material | Silicon |
| Tip coating (nm) | None |
Additional Information
| Tip Radius | 7 |
|---|---|
| Tip Radius | 5-10 nm |
| Spring Constant | 26 |
| Frequency | 300 |
| Compatibility | blueDrive, GetReal \ GetStarted |
| Manufacturer | Olympus |
FAST SHIPPING
Most orders shipped within 24 hours on business days.
MONEY BACK
Contact us for a replacement or refund
Related Products
Starting at:
Starting at:
© 2016 Oxford Instruments Asylum Research, Inc. All Rights Reserved.