Important: Our new home for AFM probes is launching. The US and Canada is now served at estore.oxinst.us . Australia, India, Singapore, South Korea, and Taiwan are served at estore.oxinst.com . You must create a MyOI account to use the store, instructions here . If you have any questions or concerns please contact: Dominic.Paszkeicz@oxinst.com
PointProbe® Plus Non-Contact / Tapping Mode - High Resonance Frequency - Reflex Coating
The new PointProbe® Plus (PPP) combines the well-known features of the proven PointProbe® series such as high application versatility and compatibility with most commercial SPMs with a further reduced and more reproducible tip radius as well as a more defined tip shape. The typical tip radius of less than 7 nm and the minimized variation in tip shape provide more reproducible images and enhanced resolution.
NANOSENSORS™ PPP-NCHR probes are designed for non-contact mode or tapping mode AFM (also known as: attractive or dynamic mode). This AFM probe combines high operation stability with outstanding sensitivity and fast scanning ability.
The probe offers unique features:
• Guaranteed tip radius of curvature < 10nm
• Tip height 10 - 15 µm
• Highly doped silicon to dissipate static charge
• Al coating on detector side of cantilever
• High mechanical Q-factor for high sensitivity
The reflex coating is an approximately 30 nm thick aluminum coating on the detector side of the cantilever which enhances the reflectivity of the laser beam by a factor of about 2.5. Furthermore it prevents light from interfering within the cantilever. The virtually stress-free coating is bending the cantilever less than 3.5% of the cantilever length.
Spring k (N/m
42 (10 - 130)
330 (204 - 497)
125 (115 - 135)
30 (22.5 - 37.5)
4.0 (3.0 - 5.0)
Reflex Coating (nm)
Tip radius (nm)
Tip height (µm)
12.5 +/- 2.5
Front angle (°)
25 +/- 2
Back angle (°)
15 +/- 2
Side angle (°)
22.5 +/- 2
Tip coating (nm)
Use spaces to separate tags. Use single quotes (') for phrases.